The Williams 2 pair wall mounted boot dryer blows volumes of room temperature air inside your boots, shoes or gloves to dry them safely, gently and thoroughly. Plus, it's safe to run for extended periods of time and not risk the possibility of damaging your boot liners. The Williams compact space saving design gets the boot clutter off the floor and is ideal for tight locations like inside a locker*. The simple low maintenance design is built for years of trouble free operation.

Our locker dryers are sold in a minimum order of 10 dryers.

Features:

• Fits in a locker
• Boots are stored up side down preventing contamination by debris from above.
• The storage arms deliver air flow directly to the toe of the boot. Drying occurs from the toe back.
• Sturdy welded 16ga steel construction.
• Plugs into a 110V outlet and is CSA tested
• Compact and space saving design
• Designed to mount to the wall above the floor at the top and bottom of the unit on a 16" wall stud center.
• Energy Saving operation
• Electrical cord length is 3 feet. Several dryers can be placed on a single circuit. Client installed switched plug or timer is required (not supplied) to cycle the dryers on and off. Plug in for power, no on/off switch on the dryer.
• Blows ambient (room temperature) air
• Drying time is approximately 4-6 hours, depending on ambient air temperature, humidity, elevation and relative wetness.
• If mounting in a locker the minimum locker depth is 21 inches
• Hand built in North America

Specifications:

Facts:

• Feet and hands have the highest number of sweat glands per square inch.
• Moisture breeds fungus and bacteria that create odor.
• Cold is caused by the loss of heat
• Moist garments are up to 25 times colder than dry garments.
• Because boots, shoes and gloves are closed end garments, they do not dry well without the aid of dryers.