Williams 24 Pair Wall Mounted Boot Dryer

Williams 24 Pair Wall Mounted Boot Dryer
    $2,995.00
    $2,695.00

    Item: WDD-24

    AVAILABILITY: IN STOCK
    Allow an additional 5-7 business days for this item to ship

    Due to the oversized nature of this product, Freight charges apply and can only be calculated after the checkout. We will contact you with the exact amount.

    Share this product  

    Dry 24 Pair of Boots with Ambient Air or Warmed Air!

    The Williams Wall Mount 24 Pair Boot Dryer delivers high volume, room temperature air, or warmed air, inside of your boots, shoes or gloves to dry them safely, gently and thoroughly. Plus, it's safe to run for extended periods of time and not risk the possibility of damaging your boot liners. The compact space saving design gets the boot clutter off the floor and is ideal for tight locations. The simple low maintenance design is built for years of trouble free operation.

    Features:
    • Boots are stored up side down preventing contamination by debris from above.
    • The drying arms deliver airflow directly to the most difficult part of the boot to dry first - the toe. Drying occurs from the toe back.
    • Sturdy welded 16ga steel construction.
    • Semi gloss, highly durable, white powder coated finish.
    • Plugs into a standard 110V outlet and is CSA tested and inspected.
    • Compact and space saving design
    • Supported on feet at floor level and fastened to the wall at the top of the dryer. You will need to find the wall studs to secure the dryer at this top location.
    • Electrical cord length is 8 feet. There is a switch to turn the dryer on, off, or to turn from warmed air to ambient air. A plug in wall timer is included with the dryer.
    • Delivers high volume ambient (room temperature) air OR warm air (your choice)
    • Drying time is about an hour, depending on air temperature, humidity, elevation and relative wetness.
    • On/Off/On energy management switch with 24 hour plug in wall timer.
    • Hand built in North America
    • Available on special order in 220V at no extra charge

    Specifications:

    Description: Wall Mounted - 24 pair boot dryer
    Dimensions: 48"W x 20"D x 80"H
    Weight: 135 lbs
    Blower CFM: 490 cfm (+/-)
    Built in Warmer: Yes
    Amps: 10A
    Watts: 1250
    Volts: 110v AC
    Sound (empty or full): 58 dB (+/-)
    Finish Semi Gloss White Finish
    Construction: Sturdy welded 16ga steel
    Warranty: 5 Year Warranty on superstructure. Two year on electrical.
    Notes: Switch to turn from warmed air to ambient air
    Note: Machine is floor supported and attached at the wall.
    Air Distribution
    • Warmed air is mechanically distributed either to the farthest or hardest part of a garment (or boot, or glove, etc) to dry.
    • The air delivery system creates a positive pressure differential between the interior and exterior of the garment.
    • As the air exits the garment it passes over the interior surfaces picking up water vapor.
    Air Temperature
    • Boots are stored up side down preventing contamination by debris from above.
    • The drying arms deliver airflow directly to the most difficult part of the boot to dry first - the toe. Drying occurs from the toe back.
    • Sturdy welded 16ga steel construction.
    • Semi gloss, highly durable, white powder coated finish.
    • Plugs into a standard 110V outlet and is CSA tested and inspected.
    • Compact and space saving design
    • Supported on feet at floor level and fastened to the wall at the top of the dryer. You will need to find the wall studs to secure the dryer at this top location.
    • Energy Saving operation
    • Electrical cord length is 8 feet. There is a warmed air on/off/ambient air on switch. A plug in wall timer is included with the dryer.
    • Delivers high volume ambient (room temperature) air OR warm air (your choice)
    • Drying time is about an hour, depending on air temperature, humidity, elevation and relative wetness.
    • On/Off/On energy management switch with 24 hour plug in wall timer.
    • Hand built in North America
    • Available on special order in 220V at no extra charge
    General Information
    • All machines are 110V CSA approved for Canada & the USA which plug into any standard duplex outlet.
    • Construction is heavy duty with a limited life time warranty on superstructure and a 1 year warranty on electrical.
    • Finish is electrostatic powder coated white.
    • Duty cycle: machines can operate continuously. Our first dryer was built in 1989 and we have had machines operate for 15 years under industrial conditions.
    • Maintenance: keep the intake screen clean. A blocked screen reduces efficiency and decreases life expectancy.

    Average Customer Rating:

    There are currently no customer product Testimonials for this product.

    Be the first to write an online Testimonial and share your thoughts and experiences with others.

    There are currently no Testimonials for this product.

    Ask a question about this product.

    Ask a question about this product.

     
    Missing Options

    Please choose from the options below. Options in bold are required.